Please follow the below steps to update BIOS:

1. DOS mode 
      Step 1: In Windows mode , please make a new folder "c:\bios" and download C2-107.zip file to this folder.
      Step 2: Extract C2-107.zip under this folder.   
      Step 3: Get/create a bootable disk.
      Step 4: Insert the bootable disk into floppy drive (or external USB floppy drive) connected to the unit and reboot the system. 
      Step 5: Press <F2> to enter BIOS setup, choose [Boot] on the top menu, follow the instructions to select "Floppy Drive" as first boot device, then save setting and reboot.  Please make sure to enable [Legacy USB Support] in Advanced page if you use external USB floppy drive.
      Step 6: Go to directory "c:\bios" and execute the batch file C2-107.bat to update BIOS in DOS mode
      Step 7: After the flash , please load load setup defaults in BIOS setting .

2. Windows Mode
   Step 1: Please download C2-107.zip file to Windows desktop.
   Step 2: Choose C2-107.zip icon and use mouse right key to select "Extract All..." to decompress this file.   You will get  C2-107.exe. 
   Step 3: Execute C2-107.exe and follow the instructions to update BIOS.
   Step 4: After the flash , please load load setup defaults in BIOS setting .

3. Revise histrory: 
BIOS v1.07
1. Fix ExpressCard(PCI-Express/USB WRAP CARD P/N 27K9813) not work when cold dock with this device.
2. Support W port replicator.

BIOS v1.06
1. System will be no display when lid is closed before WinXP startup then reopen the lid after desktop.
2. System cannot resume to OS after hot dock Ez4 then enter S4 for UMA Config.
3. OS displays wrong battery information becasue BIOS doesn't set to right EC bank.

BIOS v1.05
1. Modify D2D Recovery function default as "Enabled".
2. Modify FIR function default as "Enabled".
3. Fix BIOS Setup garbage display issue when press F2 (Don't display error message.)
4. Support SW jumper - combination keys (Fn+Esc) for bootblock.
5. Fix system cannot enter S3/S4 after user disable cardbus, enter S3/S4 one time and then enable cardbus in Windows
6. Fix External Clock in DMI table type 4 and SMBIOS DIMM type 17 error.

BIOS v1.04
1. Update VBIOS ALV12190.cn2.
2. Set CRID=3 for 915GM C1 stepping.
3. Update Intel Memory Sample code r1.92 for Alviso C1 stepping.
4. Remove CMOS ID of Tablet LID check during OS resume from S3, S4, S5.
